# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
"""Launches PODs."""
from __future__ import annotations
import enum
import itertools
import json
import math
import time
from collections.abc import Generator, Iterable
from contextlib import closing, suppress
from dataclasses import dataclass
from datetime import timedelta
from typing import TYPE_CHECKING, Protocol, cast
import pendulum
import tenacity
from kubernetes import client, watch
from kubernetes.client.rest import ApiException
from kubernetes.stream import stream as kubernetes_stream
from pendulum import DateTime
from pendulum.parsing.exceptions import ParserError
from typing_extensions import Literal
from urllib3.exceptions import HTTPError, TimeoutError
from airflow.exceptions import AirflowException
from airflow.providers.cncf.kubernetes.callbacks import ExecutionMode, KubernetesPodOperatorCallback
from airflow.providers.cncf.kubernetes.utils.xcom_sidecar import PodDefaults
from airflow.utils.log.logging_mixin import LoggingMixin
from airflow.utils.timezone import utcnow
if TYPE_CHECKING:
from kubernetes.client.models.core_v1_event_list import CoreV1EventList
from kubernetes.client.models.v1_container_status import V1ContainerStatus
from kubernetes.client.models.v1_pod import V1Pod
from urllib3.response import HTTPResponse
EMPTY_XCOM_RESULT = "__airflow_xcom_result_empty__"
"""
Sentinel for no xcom result.
:meta private:
"""
[docs]class PodLaunchFailedException(AirflowException):
"""When pod launching fails in KubernetesPodOperator."""
[docs]def should_retry_start_pod(exception: BaseException) -> bool:
"""Check if an Exception indicates a transient error and warrants retrying."""
if isinstance(exception, ApiException):
return str(exception.status) == "409"
return False
[docs]class PodPhase:
"""
Possible pod phases.
See https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase.
"""
[docs] SUCCEEDED = "Succeeded"
[docs] terminal_states = {FAILED, SUCCEEDED}
[docs]class PodOperatorHookProtocol(Protocol):
"""
Protocol to define methods relied upon by KubernetesPodOperator.
Subclasses of KubernetesPodOperator, such as GKEStartPodOperator, may use
hooks that don't extend KubernetesHook. We use this protocol to document the
methods used by KPO and ensure that these methods exist on such other hooks.
"""
@property
[docs] def core_v1_client(self) -> client.CoreV1Api:
"""Get authenticated client object."""
@property
[docs] def is_in_cluster(self) -> bool:
"""Expose whether the hook is configured with ``load_incluster_config`` or not."""
[docs] def get_pod(self, name: str, namespace: str) -> V1Pod:
"""Read pod object from kubernetes API."""
[docs] def get_namespace(self) -> str | None:
"""Return the namespace that defined in the connection."""
[docs] def get_xcom_sidecar_container_image(self) -> str | None:
"""Return the xcom sidecar image that defined in the connection."""
[docs] def get_xcom_sidecar_container_resources(self) -> str | None:
"""Return the xcom sidecar resources that defined in the connection."""
[docs]def get_container_status(pod: V1Pod, container_name: str) -> V1ContainerStatus | None:
"""Retrieve container status."""
if pod and pod.status:
container_statuses = itertools.chain(
pod.status.container_statuses, pod.status.init_container_statuses
)
else:
container_statuses = None
if container_statuses:
# In general the variable container_statuses can store multiple items matching different containers.
# The following generator expression yields all items that have name equal to the container_name.
# The function next() here calls the generator to get only the first value. If there's nothing found
# then None is returned.
return next((x for x in container_statuses if x.name == container_name), None)
return None
[docs]def container_is_running(pod: V1Pod, container_name: str) -> bool:
"""
Examine V1Pod ``pod`` to determine whether ``container_name`` is running.
If that container is present and running, returns True. Returns False otherwise.
"""
container_status = get_container_status(pod, container_name)
if not container_status:
return False
return container_status.state.running is not None
[docs]def container_is_completed(pod: V1Pod, container_name: str) -> bool:
"""
Examine V1Pod ``pod`` to determine whether ``container_name`` is completed.
If that container is present and completed, returns True. Returns False otherwise.
"""
container_status = get_container_status(pod, container_name)
if not container_status:
return False
return container_status.state.terminated is not None
[docs]def container_is_succeeded(pod: V1Pod, container_name: str) -> bool:
"""
Examine V1Pod ``pod`` to determine whether ``container_name`` is completed and succeeded.
If that container is present and completed and succeeded, returns True. Returns False otherwise.
"""
if not container_is_completed(pod, container_name):
return False
container_status = get_container_status(pod, container_name)
if not container_status:
return False
return container_status.state.terminated.exit_code == 0
[docs]def container_is_wait(pod: V1Pod, container_name: str) -> bool:
"""
Examine V1Pod ``pod`` to determine whether ``container_name`` is waiting.
If that container is present and waiting, returns True. Returns False otherwise.
"""
container_status = get_container_status(pod, container_name)
if not container_status:
return False
return container_status.state.waiting is not None
[docs]def container_is_terminated(pod: V1Pod, container_name: str) -> bool:
"""
Examine V1Pod ``pod`` to determine whether ``container_name`` is terminated.
If that container is present and terminated, returns True. Returns False otherwise.
"""
container_statuses = pod.status.container_statuses if pod and pod.status else None
if not container_statuses:
return False
container_status = next((x for x in container_statuses if x.name == container_name), None)
if not container_status:
return False
return container_status.state.terminated is not None
[docs]def get_container_termination_message(pod: V1Pod, container_name: str):
with suppress(AttributeError, TypeError):
container_statuses = pod.status.container_statuses
container_status = next((x for x in container_statuses if x.name == container_name), None)
return container_status.state.terminated.message if container_status else None
[docs]def check_exception_is_kubernetes_api_unauthorized(exc: BaseException):
return isinstance(exc, ApiException) and exc.status and str(exc.status) == "401"
[docs]class PodLaunchTimeoutException(AirflowException):
"""When pod does not leave the ``Pending`` phase within specified timeout."""
[docs]class PodNotFoundException(AirflowException):
"""Expected pod does not exist in kube-api."""
class PodLogsConsumer:
"""
Responsible for pulling pod logs from a stream with checking a container status before reading data.
This class is a workaround for the issue https://github.com/apache/airflow/issues/23497.
:param response: HTTP response with logs
:param pod: Pod instance from Kubernetes client
:param pod_manager: Pod manager instance
:param container_name: Name of the container that we're reading logs from
:param post_termination_timeout: (Optional) The period of time in seconds representing for how long time
logs are available after the container termination.
:param read_pod_cache_timeout: (Optional) The container's status cache lifetime.
The container status is cached to reduce API calls.
:meta private:
"""
def __init__(
self,
response: HTTPResponse,
pod: V1Pod,
pod_manager: PodManager,
container_name: str,
post_termination_timeout: int = 120,
read_pod_cache_timeout: int = 120,
):
self.response = response
self.pod = pod
self.pod_manager = pod_manager
self.container_name = container_name
self.post_termination_timeout = post_termination_timeout
self.last_read_pod_at = None
self.read_pod_cache = None
self.read_pod_cache_timeout = read_pod_cache_timeout
def __iter__(self) -> Generator[bytes, None, None]:
r"""Yield log items divided by the '\n' symbol."""
incomplete_log_item: list[bytes] = []
if self.logs_available():
for data_chunk in self.response.stream(amt=None, decode_content=True):
if b"\n" in data_chunk:
log_items = data_chunk.split(b"\n")
yield from self._extract_log_items(incomplete_log_item, log_items)
incomplete_log_item = self._save_incomplete_log_item(log_items[-1])
else:
incomplete_log_item.append(data_chunk)
if not self.logs_available():
break
if incomplete_log_item:
yield b"".join(incomplete_log_item)
@staticmethod
def _extract_log_items(incomplete_log_item: list[bytes], log_items: list[bytes]):
yield b"".join(incomplete_log_item) + log_items[0] + b"\n"
for x in log_items[1:-1]:
yield x + b"\n"
@staticmethod
def _save_incomplete_log_item(sub_chunk: bytes):
return [sub_chunk] if [sub_chunk] else []
def logs_available(self):
remote_pod = self.read_pod()
if container_is_running(pod=remote_pod, container_name=self.container_name):
return True
container_status = get_container_status(pod=remote_pod, container_name=self.container_name)
state = container_status.state if container_status else None
terminated = state.terminated if state else None
if terminated:
termination_time = terminated.finished_at
if termination_time:
return termination_time + timedelta(seconds=self.post_termination_timeout) > utcnow()
return False
def read_pod(self):
_now = utcnow()
if (
self.read_pod_cache is None
or self.last_read_pod_at + timedelta(seconds=self.read_pod_cache_timeout) < _now
):
self.read_pod_cache = self.pod_manager.read_pod(self.pod)
self.last_read_pod_at = _now
return self.read_pod_cache
@dataclass
[docs]class PodLoggingStatus:
"""Return the status of the pod and last log time when exiting from `fetch_container_logs`."""
[docs] last_log_time: DateTime | None
[docs]class PodManager(LoggingMixin):
"""Create, monitor, and otherwise interact with Kubernetes pods for use with the KubernetesPodOperator."""
def __init__(
self,
kube_client: client.CoreV1Api,
callbacks: type[KubernetesPodOperatorCallback] | None = None,
):
"""
Create the launcher.
:param kube_client: kubernetes client
:param callbacks:
"""
super().__init__()
self._client = kube_client
self._watch = watch.Watch()
self._callbacks = callbacks
[docs] def run_pod_async(self, pod: V1Pod, **kwargs) -> V1Pod:
"""Run POD asynchronously."""
sanitized_pod = self._client.api_client.sanitize_for_serialization(pod)
json_pod = json.dumps(sanitized_pod, indent=2)
self.log.debug("Pod Creation Request: \n%s", json_pod)
try:
resp = self._client.create_namespaced_pod(
body=sanitized_pod, namespace=pod.metadata.namespace, **kwargs
)
self.log.debug("Pod Creation Response: %s", resp)
except Exception as e:
self.log.exception(
"Exception when attempting to create Namespaced Pod: %s", str(json_pod).replace("\n", " ")
)
raise e
return resp
[docs] def delete_pod(self, pod: V1Pod) -> None:
"""Delete POD."""
try:
self._client.delete_namespaced_pod(
pod.metadata.name, pod.metadata.namespace, body=client.V1DeleteOptions()
)
except ApiException as e:
# If the pod is already deleted
if str(e.status) != "404":
raise
@tenacity.retry(
stop=tenacity.stop_after_attempt(3),
wait=tenacity.wait_random_exponential(),
reraise=True,
retry=tenacity.retry_if_exception(should_retry_start_pod),
)
[docs] def create_pod(self, pod: V1Pod) -> V1Pod:
"""Launch the pod asynchronously."""
return self.run_pod_async(pod)
[docs] def await_pod_start(
self, pod: V1Pod, startup_timeout: int = 120, startup_check_interval: int = 1
) -> None:
"""
Wait for the pod to reach phase other than ``Pending``.
:param pod:
:param startup_timeout: Timeout (in seconds) for startup of the pod
(if pod is pending for too long, fails task)
:param startup_check_interval: Interval (in seconds) between checks
:return:
"""
curr_time = time.time()
while True:
remote_pod = self.read_pod(pod)
if remote_pod.status.phase != PodPhase.PENDING:
break
self.log.warning("Pod not yet started: %s", pod.metadata.name)
if time.time() - curr_time >= startup_timeout:
msg = (
f"Pod took longer than {startup_timeout} seconds to start. "
"Check the pod events in kubernetes to determine why."
)
raise PodLaunchFailedException(msg)
time.sleep(startup_check_interval)
def fetch_container_logs(
self,
pod: V1Pod,
container_name: str,
*,
follow=False,
since_time: DateTime | None = None,
post_termination_timeout: int = 120,
) -> PodLoggingStatus:
"""
Follow the logs of container and stream to airflow logging.
Returns when container exits.
Between when the pod starts and logs being available, there might be a delay due to CSR not approved
and signed yet. In such situation, ApiException is thrown. This is why we are retrying on this
specific exception.
:meta private:
"""
def consume_logs(*, since_time: DateTime | None = None) -> tuple[DateTime | None, Exception | None]:
"""
Try to follow container logs until container completes.
For a long-running container, sometimes the log read may be interrupted
Such errors of this kind are suppressed.
Returns the last timestamp observed in logs.
"""
exception = None
last_captured_timestamp = None
# We timeout connections after 30 minutes because otherwise they can get
# stuck forever. The 30 is somewhat arbitrary.
# As a consequence, a TimeoutError will be raised no more than 30 minutes
# after starting read.
connection_timeout = 60 * 30
# We set a shorter read timeout because that helps reduce *connection* timeouts
# (since the connection will be restarted periodically). And with read timeout,
# we don't need to worry about either duplicate messages or losing messages; we
# can safely resume from a few seconds later
read_timeout = 60 * 5
try:
logs = self.read_pod_logs(
pod=pod,
container_name=container_name,
timestamps=True,
since_seconds=(
math.ceil((pendulum.now() - since_time).total_seconds()) if since_time else None
),
follow=follow,
post_termination_timeout=post_termination_timeout,
_request_timeout=(connection_timeout, read_timeout),
)
message_to_log = None
message_timestamp = None
progress_callback_lines = []
try:
for raw_line in logs:
line = raw_line.decode("utf-8", errors="backslashreplace")
line_timestamp, message = self.parse_log_line(line)
if line_timestamp: # detect new log line
if message_to_log is None: # first line in the log
message_to_log = message
message_timestamp = line_timestamp
progress_callback_lines.append(line)
else: # previous log line is complete
for line in progress_callback_lines:
if self._callbacks:
self._callbacks.progress_callback(
line=line, client=self._client, mode=ExecutionMode.SYNC
)
if message_to_log is not None:
if is_log_group_marker(message_to_log):
print(message_to_log)
else:
self.log.info("[%s] %s", container_name, message_to_log)
last_captured_timestamp = message_timestamp
message_to_log = message
message_timestamp = line_timestamp
progress_callback_lines = [line]
else: # continuation of the previous log line
message_to_log = f"{message_to_log}\n{message}"
progress_callback_lines.append(line)
finally:
# log the last line and update the last_captured_timestamp
for line in progress_callback_lines:
if self._callbacks:
self._callbacks.progress_callback(
line=line, client=self._client, mode=ExecutionMode.SYNC
)
if message_to_log is not None:
if is_log_group_marker(message_to_log):
print(message_to_log)
else:
self.log.info("[%s] %s", container_name, message_to_log)
last_captured_timestamp = message_timestamp
except TimeoutError as e:
# in case of timeout, increment return time by 2 seconds to avoid
# duplicate log entries
if val := (last_captured_timestamp or since_time):
return val.add(seconds=2), e
except HTTPError as e:
exception = e
self.log.exception(
"Reading of logs interrupted for container %r; will retry.",
container_name,
)
return last_captured_timestamp or since_time, exception
# note: `read_pod_logs` follows the logs, so we shouldn't necessarily *need* to
# loop as we do here. But in a long-running process we might temporarily lose connectivity.
# So the looping logic is there to let us resume following the logs.
last_log_time = since_time
while True:
last_log_time, exc = consume_logs(since_time=last_log_time)
if not self.container_is_running(pod, container_name=container_name):
return PodLoggingStatus(running=False, last_log_time=last_log_time)
if not follow:
return PodLoggingStatus(running=True, last_log_time=last_log_time)
else:
# a timeout is a normal thing and we ignore it and resume following logs
if not isinstance(exc, TimeoutError):
self.log.warning(
"Pod %s log read interrupted but container %s still running. Logs generated in the last one second might get duplicated.",
pod.metadata.name,
container_name,
)
time.sleep(1)
def _reconcile_requested_log_containers(
self, requested: Iterable[str] | str | bool | None, actual: list[str], pod_name
) -> list[str]:
"""Return actual containers based on requested."""
containers_to_log = []
if actual:
if isinstance(requested, str):
# fetch logs only for requested container if only one container is provided
if requested in actual:
containers_to_log.append(requested)
else:
self.log.error(
"container %s whose logs were requested not found in the pod %s",
requested,
pod_name,
)
elif isinstance(requested, bool):
# if True is provided, get logs for all the containers
if requested is True:
containers_to_log.extend(actual)
else:
self.log.error(
"False is not a valid value for container_logs",
)
else:
# if a sequence of containers are provided, iterate for every container in the pod
if isinstance(requested, Iterable):
for container in requested:
if container in actual:
containers_to_log.append(container)
else:
self.log.error(
"Container %s whose logs were requests not found in the pod %s",
container,
pod_name,
)
else:
self.log.error(
"Invalid type %s specified for container names input parameter", type(requested)
)
else:
self.log.error("Could not retrieve containers for the pod: %s", pod_name)
return containers_to_log
def fetch_requested_init_container_logs(
self, pod: V1Pod, init_containers: Iterable[str] | str | Literal[True] | None, follow_logs=False
) -> list[PodLoggingStatus]:
"""
Follow the logs of containers in the specified pod and publish it to airflow logging.
Returns when all the containers exit.
:meta private:
"""
pod_logging_statuses = []
all_containers = self.get_init_container_names(pod)
containers_to_log = self._reconcile_requested_log_containers(
requested=init_containers,
actual=all_containers,
pod_name=pod.metadata.name,
)
# sort by spec.initContainers because containers runs sequentially
containers_to_log = sorted(containers_to_log, key=lambda cn: all_containers.index(cn))
for c in containers_to_log:
self._await_init_container_start(pod=pod, container_name=c)
status = self.fetch_container_logs(pod=pod, container_name=c, follow=follow_logs)
pod_logging_statuses.append(status)
return pod_logging_statuses
def fetch_requested_container_logs(
self, pod: V1Pod, containers: Iterable[str] | str | Literal[True], follow_logs=False
) -> list[PodLoggingStatus]:
"""
Follow the logs of containers in the specified pod and publish it to airflow logging.
Returns when all the containers exit.
:meta private:
"""
pod_logging_statuses = []
all_containers = self.get_container_names(pod)
containers_to_log = self._reconcile_requested_log_containers(
requested=containers,
actual=all_containers,
pod_name=pod.metadata.name,
)
for c in containers_to_log:
status = self.fetch_container_logs(pod=pod, container_name=c, follow=follow_logs)
pod_logging_statuses.append(status)
return pod_logging_statuses
[docs] def await_container_completion(self, pod: V1Pod, container_name: str) -> None:
"""
Wait for the given container in the given pod to be completed.
:param pod: pod spec that will be monitored
:param container_name: name of the container within the pod to monitor
"""
while True:
remote_pod = self.read_pod(pod)
terminated = container_is_completed(remote_pod, container_name)
if terminated:
break
self.log.info("Waiting for container '%s' state to be completed", container_name)
time.sleep(1)
[docs] def await_pod_completion(
self, pod: V1Pod, istio_enabled: bool = False, container_name: str = "base"
) -> V1Pod:
"""
Monitor a pod and return the final state.
:param istio_enabled: whether istio is enabled in the namespace
:param pod: pod spec that will be monitored
:param container_name: name of the container within the pod
:return: tuple[State, str | None]
"""
while True:
remote_pod = self.read_pod(pod)
if remote_pod.status.phase in PodPhase.terminal_states:
break
if istio_enabled and container_is_completed(remote_pod, container_name):
break
self.log.info("Pod %s has phase %s", pod.metadata.name, remote_pod.status.phase)
time.sleep(2)
return remote_pod
[docs] def parse_log_line(self, line: str) -> tuple[DateTime | None, str]:
"""
Parse K8s log line and returns the final state.
:param line: k8s log line
:return: timestamp and log message
"""
timestamp, sep, message = line.strip().partition(" ")
if not sep:
return None, line
try:
last_log_time = cast(DateTime, pendulum.parse(timestamp))
except ParserError:
return None, line
return last_log_time, message
[docs] def container_is_running(self, pod: V1Pod, container_name: str) -> bool:
"""Read pod and checks if container is running."""
remote_pod = self.read_pod(pod)
return container_is_running(pod=remote_pod, container_name=container_name)
[docs] def container_is_terminated(self, pod: V1Pod, container_name: str) -> bool:
"""Read pod and checks if container is terminated."""
remote_pod = self.read_pod(pod)
return container_is_terminated(pod=remote_pod, container_name=container_name)
@tenacity.retry(stop=tenacity.stop_after_attempt(6), wait=tenacity.wait_exponential(max=15), reraise=True)
[docs] def read_pod_logs(
self,
pod: V1Pod,
container_name: str,
tail_lines: int | None = None,
timestamps: bool = False,
since_seconds: int | None = None,
follow=True,
post_termination_timeout: int = 120,
**kwargs,
) -> PodLogsConsumer:
"""Read log from the POD."""
additional_kwargs = {}
if since_seconds:
additional_kwargs["since_seconds"] = since_seconds
if tail_lines:
additional_kwargs["tail_lines"] = tail_lines
additional_kwargs.update(**kwargs)
try:
logs = self._client.read_namespaced_pod_log(
name=pod.metadata.name,
namespace=pod.metadata.namespace,
container=container_name,
follow=follow,
timestamps=timestamps,
_preload_content=False,
**additional_kwargs,
)
except HTTPError:
self.log.exception("There was an error reading the kubernetes API.")
raise
return PodLogsConsumer(
response=logs,
pod=pod,
pod_manager=self,
container_name=container_name,
post_termination_timeout=post_termination_timeout,
)
@tenacity.retry(stop=tenacity.stop_after_attempt(3), wait=tenacity.wait_exponential(), reraise=True)
def get_init_container_names(self, pod: V1Pod) -> list[str]:
"""
Return container names from the POD except for the airflow-xcom-sidecar container.
:meta private:
"""
return [container_spec.name for container_spec in pod.spec.init_containers]
@tenacity.retry(stop=tenacity.stop_after_attempt(3), wait=tenacity.wait_exponential(), reraise=True)
def get_container_names(self, pod: V1Pod) -> list[str]:
"""
Return container names from the POD except for the airflow-xcom-sidecar container.
:meta private:
"""
pod_info = self.read_pod(pod)
return [
container_spec.name
for container_spec in pod_info.spec.containers
if container_spec.name != PodDefaults.SIDECAR_CONTAINER_NAME
]
@tenacity.retry(stop=tenacity.stop_after_attempt(3), wait=tenacity.wait_exponential(), reraise=True)
[docs] def read_pod_events(self, pod: V1Pod) -> CoreV1EventList:
"""Read events from the POD."""
try:
return self._client.list_namespaced_event(
namespace=pod.metadata.namespace, field_selector=f"involvedObject.name={pod.metadata.name}"
)
except HTTPError as e:
raise AirflowException(f"There was an error reading the kubernetes API: {e}")
@tenacity.retry(stop=tenacity.stop_after_attempt(3), wait=tenacity.wait_exponential(), reraise=True)
[docs] def read_pod(self, pod: V1Pod) -> V1Pod:
"""Read POD information."""
try:
return self._client.read_namespaced_pod(pod.metadata.name, pod.metadata.namespace)
except HTTPError as e:
raise AirflowException(f"There was an error reading the kubernetes API: {e}")
[docs] def await_xcom_sidecar_container_start(
self, pod: V1Pod, timeout: int = 900, log_interval: int = 30
) -> None:
"""Check if the sidecar container has reached the 'Running' state before performing do_xcom_push."""
self.log.info("Checking if xcom sidecar container is started.")
start_time = time.time()
last_log_time = start_time
while True:
elapsed_time = time.time() - start_time
if self.container_is_running(pod, PodDefaults.SIDECAR_CONTAINER_NAME):
self.log.info("The xcom sidecar container has started.")
break
if (time.time() - last_log_time) >= log_interval:
self.log.warning(
"Still waiting for the xcom sidecar container to start. Elapsed time: %d seconds.",
int(elapsed_time),
)
last_log_time = time.time()
if elapsed_time > timeout:
raise AirflowException(
f"Xcom sidecar container did not start within {timeout // 60} minutes."
)
time.sleep(1)
@tenacity.retry(
stop=tenacity.stop_after_attempt(5),
wait=tenacity.wait_exponential(multiplier=1, min=4, max=10),
reraise=True,
)
@tenacity.retry(
stop=tenacity.stop_after_attempt(5),
wait=tenacity.wait_exponential(multiplier=1, min=4, max=10),
reraise=True,
)
def _exec_pod_command(self, resp, command: str) -> str | None:
res = ""
if not resp.is_open():
return None
self.log.info("Running command... %s", command)
resp.write_stdin(f"{command}\n")
while resp.is_open():
resp.update(timeout=1)
while resp.peek_stdout():
res += resp.read_stdout()
error_res = ""
while resp.peek_stderr():
error_res += resp.read_stderr()
if error_res:
self.log.info("stderr from command: %s", error_res)
break
if res:
return res
return None
def _await_init_container_start(self, pod: V1Pod, container_name: str):
while True:
remote_pod = self.read_pod(pod)
if (
remote_pod.status is not None
and remote_pod.status.phase != PodPhase.PENDING
and get_container_status(remote_pod, container_name) is not None
and not container_is_wait(remote_pod, container_name)
):
return
time.sleep(1)
[docs]class OnFinishAction(str, enum.Enum):
"""Action to take when the pod finishes."""
[docs] DELETE_POD = "delete_pod"
[docs] DELETE_SUCCEEDED_POD = "delete_succeeded_pod"
[docs]def is_log_group_marker(line: str) -> bool:
"""Check if the line is a log group marker like `::group::` or `::endgroup::`."""
return line.startswith("::group::") or line.startswith("::endgroup::")